Anuncios Clasificados
Product Features
LCD liquid crystal screen with backlight can display the working time 0-100% RPM percentage!
Equipped with wireless remote control!
Slow start and slow stop time can be set!
Setting of upper and lower speed limit!
Total working time can be set, and it stops when the time is up!
Run time and stop time can be set. Repeated automatic start/stop cycle!
The number of automatic start/stop times can be set!
Tap acceleration and deceleration Solve the problem of traditional potentiometer easy to break!
Product parameters
Input voltage: DC6.5V-55V (the specific voltage should be equal to the rated voltage of the motor)
Output voltage: linear under load
Instantaneous current: 30A
Continuous current: 20A
Speed regulation type: current regulation
Speed regulation type: Tap + -
Wireless remote control: Support Timer: Yes
Slow start and stop: can be set Speed display: 0-100% meter
Speed control range: 0-100
Control Frequency: 15KHZ
Wiring Type: Grid type terminal block
Support motor: brush motor
Module size: L*W*H116mm*76mm*30mm
Product net weight: 118g
Panel opening: L*W109mm*70mm
Installation: Embedded
1-2-3-4-5-6-7-8-9 function settings are as follows
Slow start time setting Function 1: 000 - 100 Slow start to 100% speed time is adjustable between 0-10 seconds Default is 1 second.
Slow Stop Time Setting Function 2: 000 - 100 The slow stop time is adjustable between 0-10 seconds and 1 second by default.
Lower Speed Limit Setting Function 3: 000 - 080 The minimum speed is adjustable from 0-80% and less than the maximum speed setting value.
Upper Speed Setting Function 4: 000 - 100 The maximum speed is adjustable from 0-100% and is greater than the minimum speed setting value Default is 100%.
Acceleration and deceleration value setting Function 5: 001 002 005 010 015 020 025 Every time you press the acceleration and deceleration keys, the speed will change 1%, 2%, 5%, 10%, 15%, 20%, 25% accordingly.
Motor Run Time Setting Function 6: 1 sec min - 99 hrs 59 min 59 sec max Default is 99 hrs 59 min 59 sec.
Motor stop time setting Function 7: 1sec min - 99h 59m 59s max Default is 99h 59m 59s.
Motor start/stop cycle times Function 8: Adjustable between 1 and 999 times Default is 999 times.
With or without timing selection Function 9: 0 no 1 yes Default 1 yes
Attention:
The input voltage must be equal to the rated voltage of the motor (within 6.5V-55V).
For example, motor rated voltage 12V input governor 12V motor rated voltage 36V input governor voltage 36V
Input 220V will be bad!
Product list:
1X governor
1X remote control
Anuncios Clasificados