Anuncios Clasificados
Sony HVR-M10U HDV 1080i VTR + Hard Case PortaBrace
Sony HVRM10U 1080i HDV / DV / DVCAM Recorder.
Sony HVR-M10U High Definition portable professional deck.
Incluye: 1 Maleta PortaBrace PB-2400FP Hard Case with Foam.
OVERVIEW:
• Opening New Opportunities for Cost-effective HD Productions.
Developed using the HDV 1080i specification of the HDVTM format,
the HVR-M10U Digital HD Videocassette Recorder provides HDV 1080i
recording and playback capabilities for a variety of roles such as a simple
playback viewer and a feeder for nonlinear editing systems.
It enables operators to record and play back 1080i HD signals, while
maintaining the DVCAMTM/DV recording and playback capabilities provided on current Sony DVCAM models.
What's more, the HVR-M10U also offers a down-conversion capability for
its 1080i recordings. These features enable the HVR-M10U to be active
immediately in current SD systems, while also providing a step-by-step
migration to the HD world – operators can continue to upload materials in
DVCAM or DV, and switch to HDV when the need arises, or upload in
HDV 1080i using the down-conversion capability as required.
In addition to basic VTR features inherited from the DSR-11, the HVR-M10U
also provides easy monitoring capabilities, with a built-in, 3.5-inch type
LCD monitor to display important information, such as the recorded image,
audio level, and set-up menu.
The HVR-M10U provides a highly powerful, yet cost-effective tool for
nonlinear editing system today and tomorrow.
HDV FORMAT:
A New Addition to the HD Format that Broadens the Scope of HD Program Production.
• HDV 1080i Specification (1):
The HDV 1080i specification of the HDV format features 1080 effective
scanning lines (interlace scanning system) and 1,440 horizontal pixels.
It adopts the MPEG-2 compression format (MP@H-14 for video), which uses 8-bit digital component recording with a sampling rate of 4:2:0. MPEG-1.
Audio Layer II is used as the audio compression format, allowing for
two-channel recording with a sampling frequency of 48 kHz/16-bit.
The HDV 1080i specification provides high picture quality that can be used
for HDTV program production.
(1) The HDV format also defines the HDV 720p specification, which features 720 effective scanning lines (progressive scanning system) and 1,280 horizontal pixels.
• Compatible with Existing and New DV Videocassette Tape:
As a member of the proven DV family of formats, the HDV format has, from
the outset, been developed for compatibility with all grades of DV videocassette tape.
This allows operators to use high-grade DV videocassette tapes for
applications where high robustness is critical, or consumer-grade videocassette tapes for more economical operations. For heavy-duty applications, newly developed high-grade PHDVM-63DM Mini Cassette tape, DigitalMasterTM, which is compatible with the HDV, DVCAM and DV formats, is available.
• Long Recording Time:
The HDV format adopts the same track pitch and tape speed as the DV format, this offering the same recording time – a maximum of 63 minutes on a mini videocassette such as DigitalMaster tape.
MAIN FEATURES:
Advanced Recording and Playback Capabilities for Diverse Nonlinear Editing Needs.
• Switchable Recording and Playback – HDV 1080i/DVCAM/DV2 and 60i/50i:
The HVR-M10U can switch between HDV 1080i, DVCAM and DV recording, providing full flexibility to record in either Standard or High Definition depending on production needs.
In addition, it can be switched between 60i and 50i modes (NTSC and PAL), allowing for flexible productions without the need for two separate VTRs with each standard.
(2) The HVR-M10U supports DV SP mode only; no support for DV LP mode.
• Down-conversion Playback Capabilities:
The HVR-M10U can convert material from 1080i down to 480i and 576i, and output these video signals through its i.LINK interface. In addition, these signals can also be output via either analog component, composite, or S-video connectors.
This allows editing of recorded material with a nonlinear editing system using current DV editing software3 as well as recording SD signals to an external VTR, while simultaneously recording HDV signals with the HVR-M10U. The HVR-M10U can also down-convert to 480p and 576p and output these signals through its analog component video connectors.
When down-converting these signals, the aspect ratio displayed can be converted from 16:9 to 4:3. Display modes can be selected from Squeeze, Letterbox or Edge crop.
(3) When using the HVR-M10U down conversion capabilities with your current DV editing software, please contact your nearest Sony office to confirm compatibility.
• i.LINKTM4 Interface:
The HVR-M10U is equipped with a 4-pin i.LINK interface.
This allows for on-cable digital transfer 5 of audio, video, and command signals to a connected VTR or nonlinear editing system in the HDV, DVCAM and DV formats.
(4) i.LINK is a trademark of Sony Corporation used only to designate
that a product contains an IEEE 1394 connector. Not all products
with an i.LINK connector will necessarily communicate with each other.
For information on compatibility, operating conditions and proper connection, please refer to the documentation supplied with any device with an i.LINK connector. For information on devices that include an i.LINK connection, please contact your nearest Sony office.
(5) Insert and assemble editing using HDV material is not recommended with the HVR-M10U. When video programs in the HDV format are transferred via the i.LINK interface and edited, transitions from cut to cut may not be smooth.
• Compact, Unique Design:
The HVR-M10U is compact, with a small footprint that enables it to be unobtrusively added to existing work environments. The HVR-M10U
is also unique – it can be placed either horizontally or vertically.
In addition, it includes a control panel lid and a cassette compartment lid on its front.
• 2-channel Independent Audio Record Level Control with Audio Level Meter:
Each input level for CH1 and CH2 can be independently adjusted using two audio level controls on the control panel and viewed with an audio level meter on the LCD monitor. The audio level meter can be recalled quickly and easily by a Status Check function.
•Time Code Preset:
The time code 6 can be preset using any number in H/M/S/F (hours/minutes/seconds/frames) to record desired tape-position information. The time-code mode can be selected between “REC RUN” and “FREE RUN”.
In addition to the time code, user bits can also be set.
(6) When recording video clips, which are transferred from other devices
through an i.LINK interface, the time code should be preset because the time code is not copied.
• External Control:
The HVR-M10U comes equipped with the wireless Remote Commander TM,
which provides control of basic functions. In addition, the HVR-M10U is equipped with a LANC terminal.
• Built-in, 16:9 Widescreen LCD Monitor:
The HVR-M10U includes a 3.5-inch type color LCD monitor with a high resolution of approx. 250,000 pixels, allowing operators to view the input source during recording, or check the playback picture, in a widescreen
aspect ratio of 16:9. This large screen is also helpful when setting menus or audio recording levels, as well as for monitoring the VTR and audio status.
• Battery Operation:
With the optional NP-F970 Info-LITHIUM Rechargeable Battery Pack attached, the HVR-M10U can continuously record in HDV mode for up to 545 minutes, or up to 630 minutes in DVCAM/DV mode with the LCD monitor off. Battery information, such as the current charge level and current remaining recording time, can be displayed on the LCD monitor at the touch of a button.
• Status Check:
At the touch of a button, operators can display the menu settings, mode of operation, time code and audio level indications superimposed over the video on the LCD monitor, allowing for easy status or settings checks during recording, playback and feeding.
• Noiseless Design, with No Cooling Fan:
The HVR-M10U requires no cooling fan, providing quiet program-production environments.
OTHER CONVENIENT FUNCTIONS:
In order to provide the flexibility required for professional recording, the HVR-M10U offers a variety of convenient functions:
- Audio Dub (DVCAM mode only).
- Headphone Jack.
- Index Marking.
- Index Search.
SPECIFICATIONS:
RECORDING/PLAYBACK PERFORMANCE:
• Recording format:
- 1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL).
• Playout/Down conversion format:
- 1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL), 480/60p, 576/50p.
• Tape speed:
- HDV/DV SP: Max. 18.812 mm/s with PHDVM-63DM cassette.
- DVCAM: Max. 28.218 mm/s with PHDVM-63DM cassette.
• Playback/Recording time:
- HDV/DV SP: Max. 63 min with PHDVM-63DM cassette
- DVCAM: Max. 41 min with PHDVM-63DM cassette.
• Fast forward/Rewind time:
- Approx. 2 min 40 s with PHDVM-63DM cassette.
INPUT/OUTPUT CONNECTORS/DEVICES:
• Video input/output:
- RCA pin x 2.
- Video signal: 1 Vp-p, 75 Ohmios unbalanced, sync negative.
• S-video input/output:
- Mini-DIN 4-pin x 2.
- Y: 1 Vp-p, 75 Ohmios unbalanced, sync negative C: 0.286 Vp-p (NTSC), 0.3 Vp-p (PAL), 75 Ohmios unbalanced.
• Component video output:
- RCA pin x 3.
- Y: 1 Vp-p (0.3 V, sync negative) Pr/Pb (Cr/Cb): 700 mVp-p (100% color bar), input impeadance 75 Ohmios.
• i.LINK:
- 4-pin.
• Phones:
- Stereo minijack (ø3.5 mm), 8 Ohmios loading.
• LANC:
- Stereo mini-minijack (ø2.5 mm).
• Audio input:
- RCA pin x 2.
- Input level: max. 4 Vrms, input impecance: min. 47 k Ohmios unbalanced.
• Audio output:
- RCA pin x 2.
- Output level: 2 Vrms (full bit), output impedance: max. 1 k Ohmios.
• LCD monitor:
- 3.5-inch type, approx. 250,000 pixels (1120 x 224), hybrid type.
GENERAL:
• Mass:
- Approx. 1.8 kg (3 lb 15 1/2 oz).
• Power requirements:
- DC 8.4 V (DC IN jack), DC 7.2 V (Battery jack input).
• Power consumption:
- HDV: 6.5 W (playback mode with LCD monitor on)
- DVCAM/DV: 5.7 W (playback mode with LCD monitor on).
• Operating temperature:
5 to 40 °C (41 to 104 °K).
• Storage temperature:
- 20 to +60 °C (-4 to 140 °K).
• Supplied accessories:
- Wireless Remote Commander, AC adaptor, power cord, stand, size AA batteries (2), cleaning cassette, operating instructions.
PortaBrace PB-2400FP Hard Case with Foam.
PORTABRACE PB-2400 OVERVIEW:
The silver platinum PB-2400FP Hard Case with Foam from Porta Brace is a watertight, high-performance, hard resin case for transporting and protecting your video, audio, and photographic equipment. It comes standard with a hard carrying handle.
• This case has a cubed foam interior.
• Unbreakable, high-strength, plastic resin construction.
• 10-20% lighter than the other hard case brands.
• Pressure relief valve to maintain water tightness.
• Double-hinged locking system for increased safety and security.
• Rigid grip handles for field comfort.
Este Item no está en su caja original, viene con un maletin nuevo PortaBrace PB-2400FP, (Hard Case with Foam), el VTR está nuevo en perfecto estado, importado de Estados Unidos.
Anuncios Clasificados