Anuncios Clasificados
• Sistema profesional de intercomunicador inalámbrico PRO850 HME.
• PARA ENTREGA INMEDIATA EN COLOMBIA •
• Fabricado por: HM Electronics, Inc. 14110 Stowe Drive, Poway, CA 92064 l USA.
• EXCELENTE EQUIPO PARA LA INDUSTRIA DE LA RADIO Y TV.
— QUE INCLUYE EL COMBO: 6 Piezas.
- 1 HME PRO850 Wireless Intercom System BASE STATION.
- 2 BELTPACS BP850 A2 Band. (INTERCOMUNICADORES).
- 2 HME Clear-Com HS15 HEADSET MICROPHONE for Intercom BeltPac BP850.
- 1 HME Clear-Com HEADSET MICROPHONE for BASE STATION.
• CONDICIÓN DEL EQUIPO – ITEM CONDITION:
- En perfectas condiciones.
- Muy bien cuidado.
- Con poco tiempo de uso.
- Un solo dueño.
- Excelente condición externa e interna.
- Listo para ser utilizado en cualquier momento.
- Importado de los Estados Unidos.
• HME PRO850 WIRELESS INTERCOM SYSTEM BASE STATION INFO:
— SYSTEM HIGHLIGHTS:
- Frequency agile.
- Exceptional operating range.
- Wide frequency response with low distortion.
- Simultaneous dual-channel operation.
- Automatic frequency selection.
- PC and PDA interface.
— USER-FRIENDLY DISPLAYS & MENUS:
- PDA850 - Operating Instructions Manual - Allows beltpac status to be checked and configuration set without returning the unit to the base station.
- Talk Status - Displays the talk status of all receivers at a glance. If a user is talking, that user’s name is clearly shown.
- Receiver Controls - Press the “Receiver Quick Menu” button to gain instant access to receiver controls.
• GO THE DISTANCE IN WIRELESS PERFORMANCE:
Why choose the PRO850 Wireless Intercom System from HME? Simply because you can do more with the PRO850 than any comparable system on the market.
With the PRO850, you'll get exceptional operating range, cutting-edge features, and the flexibility to configure and expand the entire system to meet your unique intercom needs.
Innovative features like PC and PDA interface, automated power control, simultaneous dual-channel interface, Wireless ISO, plus all the standard capabilities, give you more operating power and flexibility to achieve the best performance.
Combine all that with a ruggedly-constructed design, the PRO850 provides the utmost reliability and sound quality.
More value.
Better performance.
Greater reliability.
The PRO850 is the ultimate solution for all your intercom needs.
• BASE STATION PRO850™ WIRELESS INTERCOM SYSTEM:
— MORE OPERATING POWER:
-- Frequency agility enables you to operate the PRO850 within the 470-698 MHz UHF band.
These synthesized frequencies can be selected in 25 kHz increments over each 18 MHz operational band so you can easily choose from 720 different transmit and 720 receive frequencies.
The upper band is limited to 12 MHz and 480 receive frequencies.
-- User-friendly graphical interface on the base makes it easy to set up the system and obtain status information using the LCD display and menu keys.
Pull-down menus on the LCD provide fast, easy access to all system features.
Menus are organized by status, audio-level monitoring, system configuration and system information.
Simple navigation buttons and multi-function rotary knob facilitate the setup and access of desired features.
-- PC interface using HME's PC850 software lets you configure the entire PRO850 System and manage configuration files from the convenience of your PC via the RS-232 serial port.
-- Expandable system allows you to configure the PRO850 to meet your communication needs.
A standard PRO850 System comes with four beltpacs and a base station.
By linking several base stations to provide additional receivers, up to 16 users can communicate with each other in full-duplex operation.
-- Automated beltpac output power control helps optimize the system operating power.
The base station automatically configures beltpac settings and calibrates the power level for each beltpac, depending on its distance from the base.
This eliminates base receiver overload and extends the beltpac battery life.
-- Intermodulation-free frequency groups have been pre-configured to help you easily scan and select the best, interference-free frequency groups when you set up the PRO850.
The savvy user can also configure additional frequency groups for a quick recall.
-- Alert relay output provides a configurable set of contacts that can respond to problem conditions or to beltpac user requests.
-- Audio digitally mixed and routed under user control allows any combination of inputs to be mixed and delivered to any output.
These settings can be preset and saved to provide different mix configurations for different shows.
-- Remotely “unlatch” beltpacs from transmitting at the base to stop a rogue beltpac that’s been left transmitting without having to locate the beltpac.
— HME PRO850 BASE STATION SPECIFICATIONS:
— GENERAL:
- Frequency Range:
470-608 MHz, 614-698 MHz in Dual TX/RX Bands.
- Frequency Response:
50 Hz to 10 kHz.
- Power Requirements:
100-240 VAC, 50-60 Hz or 12-14 VDC.
- Size:
19" x 1.72" x 11.75" (1-RU),
(48.26cm x 4.37cm x 29.8cm).
- Weight:
<11 lbs (<5 kg).
- Tx & Rx Antenna:
¼-Wave (Supplied), BNC Connector.
- 4-Wire I/O:
RJ45, 600 Ohmios Balanced, Level Adjustable,
Simultaneous Operation with 2-Wire.
- 2-Wire I/O:
XLR-3F, Externally-Switchable RTS® or ClearCom®.
Mode, 200 Ohmios, Level Adjustable, Null Adjustable.
- Tx & Rx Antenna:
¼-Wave (Supplied), BNC Connector.
- 4-Wire I/O:
RJ45, 600 Ohmios Balanced, Level Adjustable,
Simultaneous Operation with 2-Wire.
- 2-Wire I/O:
XLR-3F, Externally-Switchable RTS® or ClearCom®
Mode, 200 Ohmios, Level Adjustable, Null Adjustable.
- Auxiliary Input:
XLR-3F/¼" Phone Combo Jack, 600 Ohmios Balanced,
Level Adjustable.
- Aux & Page Output:
XLR-3M, 600 Ohmios Balanced, Level Adjustable.
- Page & Alert Relay:
2 Four-Pin Phoenix, 2A @ 30 VDC Max.
- Beltpac Interface:
RJ10, RS-232.
- PC Interface:
DB9, RS-232, 38400 baud.
- External Control Interface:
RJ45, RS-422.
- Headset Connector:
XLR-4M (Optional Field-Installable XLR-5F).
- Mic Input:
Auto-Detect, Low Impedance Dynamic or Electret.
- Headset Output:
Stereo - 160 mW per Side, Mono - 250 mW.
- Front Panel Controls:
Power Switch with Indicator.
Menu Navigation Keys.
Receiver Quick-Menu Keys.
Rotary Knob for Adjustments.
Headset Channel Select & PTT.
- Front Panel Indicators:
Graphic LCD.
3 Wired System Status LEDs.
4 Receiver Status LEDs.
Headset Channel Select & Talk LEDs.
- Rear Panel Controls:
2-Wire Channel Line Null.
RTS®/ClearCom® Mode Switch.
— TRANSMITTER:
- Type:
720 Synthesized, 25 kHz Channel Steps.
- Transmit Power:
240, 100, 10 or 1 mW Configurable.
- Modulation Type:
FM.
- Deviation:
50 kHz.
- Frequency Stability:
10 ppm.
- Harmonics/Spurious:
Exceeds FCC Specifications.
— RECEIVER:
- Type:
720 Synthesized (480 for Upper Band), 25 kHz Channel Steps.
- RF Sensitivity:
<1uV for 20dB SINAD.
- Squelch Threshold:
Front Panel Adjustable.
- Image Rejection:
>70dB.
- Squelch:
Data Channel Coded Plus Carrier Signal Level.
- Squelch Quieting:
.90dB.
- Frequency Stability:
10 ppm.
- Distortion:
<1% at Maximum Deviation.
• BELTPAC WIRELESS INTERCOM SYSTEM:
— MORE FLEXIBILITY:
-- PDA interface provides a convenient method to configure beltpac frequencies and functions through a built-in IrDA port using a Palm-OS PDA and PDA850 Tools.
-- Beltpac controls are configurable for multiple transmit modes.
Separate talk buttons for each channel can be configured for "push-to-talk" or "push-to-enable" operation.
Buttons not configured for transmitter control can be configured for party-line selection, paging, ISO, alert and call functions.
-- Individual volume controls allow beltpac users to adjust and mute the volume.
The MASTER and Auxiliary Volume Controls provide a push-to-mute function so you can temporarily mute a channel while keeping previous volume settings.
-- Dual-channel access allows users to choose from two hardwired intercom channels.
Simultaneous dual-channel access is obtained using the optional 2nd receiver module.
-- Alert and Page Relay Closures allow you to remotely control external devices from the beltpac.
-- Channel lockout enables multiple beltpac users to share the same operating frequency and automatically disable a beltpac’s ability to transmit if another user is already transmitting on that frequency.
-- Low battery alert informs the user through the headset and base station that the beltpac batteries are low.
-- Versatile headset connector allows use of standard 4-pin male connector or field-install of a 4-pin or 5-pin female XLR connector.
The beltpac auto-detects the microphone type.
-- Detachable antennas with strong, threaded connectors make storage and shipping easy.
-- Auxiliary audio input allows a separate audio source, such as an IFB receiver, to be heard through the beltpac headset and controlled by the beltpac volume controls.
-- LED blackout mode enables crew members to work on a darkened stage without tell-tale lights being visible to the audience.
-- Automatic status reporting to base keeps the technical crew informed of the battery condition and which users are talking.
— BELTPAC WIRELESS INTERCOM SYSTEM SPECIFICATIONS:
— GENERAL:
- Frequency Range:
470-608 MHz, 614-698 MHz in Dual TX/RX Bands.
- Antenna Type:
Flexible ¼-Wave, Field-Replaceable.
- Frequency Response:
50 Hz to 10 kHz.
- Battery Requirements:
6 "AA" Alkaline Cells (Optional NiMH).
- Battery Life:
PTE: Up to 9 Hours (Alkaline).
PTT: Up to 15 Hours (Alkaline).
- Size:
5.75" x 4.38" x 2.31".
(14.6cm x 11.13cm x 5.87cm).
- Weight:
16 oz (0.45 kg) with Batteries.
- Base Interface:
RJ10, RS-232.
- PDA Interface:
IrDA.
- Auxiliary Input:
Connector: 1/8" Miniature Phone Jack.
Impedance: 8k Ohmios, Input Level: 100 mV.
Overrides Optional 2nd Receiver if Installed.
- Headset Connector:
XLR-4M (Optional Field-Installable XLR-4 or 5F).
- Mic Input:
Auto-Detect, Low Impedance Dynamic or Electret.
- Headset Output:
200 mW @ 1% THD into 50 Ohmios.
- Controls:
Main Volume Control with Power Switch and Push to-
Mute, 2nd RCVR/AUX Volume Control with Push to-
Mute, 4 Mode/Function Switches.
Microphone Gain Adjustment.
- Indicators:
Power/Low Battery LED.
Transmit LED & 4 Channel/Status LEDs.
Anuncios Clasificados