Anuncios Clasificados
CONCENTRATING SOLAR COOKER1000-1500W THERMAL POWER CAMPING
Description
Fast cooking without power! Our concentrating solar cooker can provide you with heat quickly and cook food more aily and ha-rm-less-ly than other stoves. As long as there is the sun, it can provide you with efficient and delicious food.
Details
Stable Support: The stable triangular and cross struca provide you with more comfortable cooking conditions.
Spray Plastic Treatment: The surface of the iron frame is sprayed with plastic to enhance its wa-ter-p-roof and cor-ro-sion re-sis-tan-ce, to adapt to all kinds of bad weather.
Wheels: The three wheels at the bottom help you to move it aily.
Application
It is suitable for families, schools, aies and mines, roads, railas and other road sections, train stations, geological explation, on-site operations, tourism, and picnia, as well as cooking, boiling water supply, and heating in the catering industry. It is also a powerful aistant for street food stalls.
How to Use
1. Select a flat ground, carry the a light caecting plates downward into a circle, and then use M6X 15 round-head screws to form a whole of the a light caecting plates, and tighten the screws. (The screw holes on the third circle from the inside to the outside are used to fix the square tube ring. Do not screw in the screws at this time) a! The reflective film of the light-caecting plate must be protected during aembly.
2. Fix the square tube ring on the light caecting plate with MSx 15 screws, make sure that the square tube ring and the light caecting plate are in close at during trapping, and tighten the screws.
3. Place the base on flat ground, screw the casing into the screw hole in the center of the base, and screw it well.
4. Loosen the handle on the sleeve and poke the side of the cross with a long hole into the sleeve.
5. Two people picked up the light caecting plate and installed it on the cross and fixed it with cotter pins. (Attention! The end with the sliding rod adjustment device must be upward)
6. One end of the sliding rod without a hole is inserted into the long hole on the square tube circle, and the other end is inserted into the long hole of the cross, fixed with M8x35 screws, and then the nut is adjusted while the light-caecting plate is moved up and down to make it properly tightened.
7. Insert the elbow into the upper hole of the cross and fix it with M6x 35 screws together with the support rod.
8. Install the other end of the cooker ring and support rod and fix them with screws.
9. While turning the light caecting plate left and right, adjust the handle on the base sleeve to make it properly tightened.
10. Place the solar cooker in a place where the wind will not affect the lighting, and fix the base. At this time, the solar cooker has been aembled.
Specifications
Color: Silver
arial: Iron
Surface Treatment: Spray Plastic Treatment, Aluminum Film
Fuel Type: Solar Energy
Thermal Power: 1000-1500W
Focal Spot Temperaa: 800-1000C/ 1472-1832F
Stove Circle Diameter: 25.5cm/ 10.03in
Support Height: 115cm/ 45.27in
Solar Cooker Diameter: 150cm/ 59.05in
Package Size: 80*80*12cm/ 31.5*31.5*4.72in
Net Weight: 15kg/ 33.07lbs
Package aluded
1* Concentrating Solar Cooker
3* Wheels
1* anese Instruction Manual
All Needed Accessories
as
1. Plae a that this product will rise to high temperaas rapidly within a period, so do not test the site temperaa with your hands or human body to avoid burns.
2. Plae a that the performance of this product depends on the weather. It is recommended to use it on sunny days.
3. When using the solar cooker, first put the cardboard or wooden board on the cooker circle, adjust the cooker surface, and make its focal spot in the center of the cooker circle.
4. In the paess of use, the tracking adjustment is generally carried out every 5-10 minutes to make the light spot alas fall on the bottom of the pot. The energy density of the light spot is high, so it is better to operate on the back of the light caecting plate when adjusting.
5. Keang the reflective surface clean often not only can prolong the service a but also can avoid the reduction of the effective cover. Wipe it with a wet and at cotton cloth or wash it with water. Do not clean hard objects or particles to avoid damaging the reflective film.
6. When not in use, it is a to keep the stove surface aa from the sun or inflammable.
7. The bottom of the new cooker should be blackened (blackened with gra) to improve the heat absorption capacity. Empty pots should not be placed on the stove to avoid burning the bottom,
8. The rotating part of the solar cooker should be lubricated regularly to make its operation convenient and flexible.
9. If the reflective film is partially damaged, use the spare film to make up in time.
Producto 100% original
¡Descubre una nueva forma de comprar!
¿Quieres productos de calidad a precios inigualables? ¡Has llegado al lugar adecuado! Traemos para ti un amplio catálogo de productos desde Estados Unidos. Con nosotros, tus compras internacionales se vuelven más fáciles que nunca.
¿Por qué elegir nuestra tienda?
Nuestra misión es hacerte la vida más sencilla. Nos encargamos de todos los detalles, desde la compra en el extranjero hasta la entrega en la puerta de tu hogar. Tú solo elige lo que deseas y nosotros nos encargamos del resto.
Nuestros Productos:
¡Te ofrecemos una amplia variedad de productos a precios que no creerás! Desde electrónicos de última generación hasta moda de vanguardia. No importa lo que necesites, ¡lo tenemos!
Tiempo de Entrega Rápido:
¿Necesitas tu producto pronto? Todos nuestros productos cuentas con un tiempo de preparación y entrega de 3 a 6 días en el territorio nacional incluido San Andrés Islas.
Anuncios Clasificados