o Compra Cable Utp Cat6a Systimax-commscope Bobina 305 Mts Nueva en Buenos Aires por $ 1000000

Cable Utp Cat6a Systimax-commscope Bobina 305 Mts Nueva

Ubicacion: Victoria, Buenos Aires
Disponibilidad: en stock en stock
Estado: Nuevo

En Oferta:
$ 1.000.000
Esta Oferta Termina en:

Apurate ! Quedan solo productos en stock !

Anuncios Clasificados

DESCRIPCION

760107078 | 1091B SLT C6A 4/23 U/UTP W1000

GigaSPEED X10D® 1091B ETL Verified Category 6A U/UTP Cable,
slate jacket, 4 pair count, 1000 ft (305 m) length, WE TOTE® box

Product Classification
Regional Availability Asia | Australia/New Zealand | Latin America | North America
Portfolio SYSTIMAX®
Product Type Twisted pair cable
Product Brand GigaSPEED X10D®

General Specifications
Product Number 1091B
ANSI/TIA Category 6A
Cable Component Type Horizontal
Cable Type U/UTP (unshielded)
Conductor Type, singles Solid
Conductors, quantity 8
Jacket Color Slate
Pairs, quantity 4
Separator Type Isolator
Transmission Standards ANSI/TIA-568.2-D | ISO/IEC 11801 Class EA

Dimensions
Cable Length 304.8 m | 1000 ft
Diameter Over Conductor 0.864 mm | 0.034 in
Diameter Over Jacket, nominal 7.239 mm | 0.285 in
Jacket Thickness 1.295 mm | 0.051 in
Conductor Gauge, singles 23 AWG

Electrical Specifications
Characteristic Impedance 100 ohm
Characteristic Impedance Tolerance ±15 ohm
dc Resistance Unbalance, maximum 4 %
dc Resistance, maximum 7.61 ohms/100 m | 2.32 ohms/100 ft
Dielectric Strength, minimum 1500 Vac | 2500 Vdc
LP (Limited Power) Rating 0.5 A
Mutual Capacitance at Frequency 6.0 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP) 65 %
Operating Frequency, maximum 550 MHz
Operating Voltage, maximum 80 V
Remote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the
safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2,
CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Material Specifications
Conductor Material Bare copper
Insulation Material Polyolefin

Jacket Material PVC
Separator Material Polyolefin
Separator 2 Material Polyolefin
Mechanical Specifications
Pulling Tension, maximum 11.34 kg | 25 lb
Environmental Specifications
Installation temperature 0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F)
Environmental Space Non-plenum
Temperature Rating, UL 90 °C | 194 °F
Flame Test Method CMR
Packaging and Weights
Cable weight 55.509 kg/km | 37.3 lb/kft
Packaging Type WE TOTE® box

Regulatory Compliance/Certifications
Agency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on
ROHS Complian

Anuncios Clasificados