Anuncios Clasificados
AMPLIFICADOR VALVULAR SYNTHESIS VERTIGO
These things of beauty are not arrived at by accident, all of their flowing features are bound by the one outcome
our design.
This unique combination of materials both natural and manmade are brought together not just as a product, but as something to be treasured.
This interpretation of hand crafted design is achieved in a way only the Italians sense of flair and taste knows how to give.
Our technology is designed to innovate and yet be simplicity to use.
Built for the World with a spirit Made in Italy Shapes, materials, finishes, technologies, all joined by a constant thought: designs and sounds that
enrichesyour quality of life..
If we can together bring well being by our designs then....... feel good.
In order to continually improve the design, quality and performance of our products and to make use of the best available materials at all time,
Synthesis reserves the right to change specifications without notice.
Colors shown in this catalogs are presented as accurately as possible. Due limitations in photografic and lithografic processes, actual colors
may vary.
Technical specifications:
Vertigo (triode connection) Code: Vertigo/t
Amplifier section:
Tubes compliments:
Power stage (1 ch.): 2 X KT120 TUNG-SOL
Driver (1 ch.): 12BH7 JJ
Input stage (1 ch.): ECC83/12AUX7 TUNG-SOL
Controls: Front: input switch selector, volume.
Rear: male power sck,
RCA gold plated
conncectors, power
connectors
Inputs: Cd player, Tuner,
Video, AUX1, AUX2.
Outputs: Tape out
Frequency response: 20Hz to 22KHz +- 0.5dB
Input impedance: 50Kohm
Output impedance: 8 ohm
Power stage configuration: TETRODE
Power output: 100W RMS/8 ohm each
channel AB1
Signal/Noise ratio: >87dB, A weighted
Finish: Synthesis red laquer
piano black laquer
Dimensions: (w,d,h) 320x220x160mm
Weight: 15.0 Kg
Power supply section:
Power consumption: 575W Max
Controls: Front: Led
Rear: female power sck,
power switch, power plug
Finish: Synthesis piano black laquer
Dimensions: (w,d,h) 145x220x140mm
Weight: 6.0 Kg
KT120 TUNG-SOL
In September of 1950 Tung-Sol introduced the 5881, an uprated and industrial version of the 6L6GA with a 23.5 watt plate dissipation, opening the doors to the hi-fi movement of the 1950s. This rugged tube also found a home in the '59 Fender Bassman and servo amplifiers used in B-52 bombers. In 1955 Tung-Sol raised the bar of high fidelity with the introduction of the 35 watt 6550, which could deliver 100 watts with a pair in push-pull configuration.
T-KT120-TUNG-MQ - Matched Quad version
Body Height 144 mm
Bulb Temperature 250°C
Capacitance, Grid 1 to Plate 1.8 pF
Capacitance, input 29 pF
Capacitance, output 10 pF
Cathode Current (Ik) 230 mA
Grid 1 Voltage > -200 V, -14 V typical
Grid 2 Dissipation 8 W
Grid 2 Voltage > 600 V, 225 V typical
Grid Circuit Resistance (Rg), Fixed Bias 51 kohm
Grid Circuit Resistance (Rg), Self Bias 2.4 Mohm
Harmonic Distortion 14 %
Heater Cathode Voltage, Negative 300 V
Heater Cathode Voltage, Positive 200 V
Heater Current 1.7 A - 1.95 A
Heater Voltage 6.3 V
Item Diameter 52 mm
Item Height 130 mm
Plate Dissipation (Wa) 60 W
Plate Resistance (Ra) 3 kohm
Plate Voltage, tetrode (Ua) 850 V
Plate Voltage, triode (Ua) > 650 V, 400 V typical
Transconductance (S) 12.5 mA/V
Anuncios Clasificados